If you are working in electrical maintenance company in dubai or are the owner of such a service, then you have to be careful in your conduct because your one mistake will take the lives of many. You have to deal with the electrical equipment all the time and if you are not fully aware of how to be careful with them then you may cause the accidents. To know how and where you need to be careful, you have to get more info about this subject and here you will get it down below:
In an electrical area you may have to change the electrode of any machinery or the main electrical circuit and you have to be careful in that because there will be direct current running in that. You have to first turn that current off before you start examining or changing the electrode to be on the safer side and to avoid any accident.
When you are working around a lot of machinery running with the DC current then you have to avoid touching any of these with your bear hands because you never know when current will be more in them. You need to avoid touching any equipment when it is running or under maintenance in order to avoid the accidents and to protect yourself from any injury.
When you are going to work with the wires in an area then you have to be careful in that and always re-check the joints and the type of wires before you start them. While you are working with that the current should be off and if you want to check the progress then you need to stay away from the equipment and see what happened to that when you turn that on. If there will be a short circuit then it means that wires are not joined correctly and you have to do that again.
When you are going to work with wires and you have to insulate them then you have to make sure that they are not live and there is no current running in them from the back end. You need to be very careful in this process as this is the most risky one not only for the lives of people but for other equipment there too.